Navona Chrome Mini Max Bath Mixer Wall Type
Navona Chrome Mini Max Bath Mixer Wall Type
The Navona Mini Max bath mixer is a simple-styled economical wall type bath mixer. It is suitable for medium pressure systems in and around your home.
The mixer will make an appealing statement in your bathroom with its smooth shiny polished chrome finish. Features a single lever handle on the tap that gives finger tip control of the temperature and flow of water. It also includes a hand held telephone shower which can be mounted on the wall with a wall bracket to be used as a shower.
To avoid any disappointments with your Navona Mini Max bath mixer please ensure that you have balanced water pressure in your home.
Features
- Simple design
- Single lever operation for flow and temperature control
- Wall Type Bath Mixer
- Colour/Finish: Polished Chrome
- Material: Durable Brass
- Ceramic disc control for smooth action and no drips
- Water Inlet: Two (hot and cold water).
- Push-pull knob on top of the spout diverts the water flow from the spout to the telephone shower.
- Includes two chrome flanges and s-connectors*.
- Includes a 150mm hose for the telephone shower.
- Includes a wall bracket and screws to hold the telephone shower in place.
- This wall bracket can be twisted to direct the flow of water from the telephone shower (see photo).
- Easy to install and maintain.
- Intended for bathtubs and shower areas.
* - The S-connector often acts as a mounting support for a bath or sink mixers, ensuring it is securely attached to the wall. It provides stability and helps to hide any unsightly pipe connections, creating a neat and tidy installation. It also allows you to install your tap easily if the water outlets on the wall are further apart or closer together than the mixer inlets.
Product Specifications
| Brand | Tivoli |
|---|---|
| Type | Bath Mixers |
| Colour | Chrome |
| Height (mm) | 104 mm |
| Length (mm) | 176 mm |
| Width (mm) | 175 mm |
Ready when you are!
Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.
Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.
Step 1. Turn Off Your Water and Remove Your Old Tap
- Before you remove the old tap, you need to first turn off the water supply for both hot and cold water from the mains supply.
- Then, run the hot and cold taps in your house for a few minutes to drain any excess water and ensure the mains is definitely switched off.
- Make sure all your taps remain open to prevent an air lock. If you have angle valves already installed than you can simply switch these off and do not need to turn off the main water supply.
- Unscrew the nut that locks the wall outlet to your old tap using a wrench.
Step 2. Unbox Your New Tap and Install
- Once the old tap is removed you can unbox your new tap and remove all the accessories from the box.
- Make sure you connect the s-connectors firmly to your tap first, this makes it much easier to install. The s-connection is used to install the wall type sinker mixer when your wall water outlets are wider that the distance of the two inlets.
- There are rubber washers included with the tap to make sure there is a water tight seal with the s-connection. Screw the nut tightly onto the threads with the s-connection. We recommend you use plumbing tape as well (not included) on the threads for a more water tight seal.
- We are now ready to mount the tap on to the wall water outlets. Adjust the s-connections to line them up with the wall water outlets and make sure it fits. Your tap should grip on to your wall outlets tightly and should not shake or wobble.
Step 3. Checks and Precautions
- Close all connections tightly and turn the water back on. Please connect the bottle trap to the popup waste if applicable before testing.
- Turn the tap on and make sure the water is mixing equally and water running smoothly in a nice bubbly flow.
- Check all connections with the water running for any leaks or drips.
Step 4. Installation Complete
- Once the water is running and no leaks are found the installation is complete.
- Make sure you use soapy water and a soft clean cloth for regular cleaning of your tap. We do not recommend to use any strong chemicals to clean your new beautiful tap.
- Now you can enjoy your brand new wall type mixer.
