Fantasy Stainless Steel Kitchen Sink - 1200 x 490 x 200mm
Fantasy Stainless Steel Kitchen Sink - 1200 x 490 x 200mm
A mother's favorite, the fully featured Fantasy Kitchen Sink 1200mm is a stylish and practical choice for your kitchen.
The sink consists of two bowls and one drain on the side of the sink to stack all your washing to dry.
You can also choose from our wide range of sink mixers and accessories to complete the look.
Features
- Material: Stainless Steel.
- Overall Size: (L)1200 x (W)490mm (H)200mm.
- Each Sink Bowl width: 360mm.
- Drain width: 400mm. (area to put the dishes to dry)
- Waste Size: 110mm.
- Shape: Rectangle.
- Two Basket strainer waste included.
- Bottle trap and overflow flexi tube included.
- Flower shape drain design.
- Sink has an allowance between the two bowls if you wish to drill a hole to mount a pillar tap.
Product Specifications
| Brand | EKOS |
|---|---|
| Type | Sinks |
| Colour | Chrome |
| Depth | 170 mm |
| Height (mm) | 170 mm |
| Length (mm) | 1200 mm |
| Width (mm) | 480 mm |
| Product Weight | 8 kg |
Step 1. - Cut Hole Into Counter For The Sink
- Place the kitchen sink upside down on the kitchen counter.
- Draw a line around the kitchen sink making sure the kitchen sink edge is parallel to the counter edge.
- Take off the kitchen sink and draw a cutting line that is half inch inside the kitchen sink outline you drew above.
- Dril a pilot hole at each corner of the cut line.
- Using the electric or manual jigsaw, cut the hole along the straight cut lines.
Step 2. - Install Kitchen Sink
- Before you install the sink please make sure you have drilled the hole in your sink for a pillar sink mixer. If your sink mixer is a wall type then you do not need to drill this hole.
Tip : Install the waste/drain into the kitchen sink before dropping it into the hole. This will be easier to do now. Make sure you apply silicon around the waste for a water tight seal.
Step 3. - Apply Silicone Along The Edges
- Apply a bead of silicone around the edge of the hole and the edge of the kitchen sink from the inside.
- Drop the kitchen sink in place and apply even pressure on all sides.
- Make sure there are no gaps inbetween the counter and kitchen sink.
Step 4. – Add Clips, Bottle Trap and Connect Drain Pipe.
- Attach clips from the bottom of the sink and evenly place them around the sink while the silicone is still wet.
- Tighten these clips until you see the sink is drawn down to the counter top. Do not over tighten the clips.
- Remove and wipe out any excess silicone that sips out.
- Now you can connect your bottle trap to the sink waste.
- You can than connect the bottle trap to the sewage drain an also attach the over flow.
- Wait 24 hours for everything to dry and then open the water to check for any leaks.
Ready when you are!
Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.
Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.