Pyramid White Built-in Corner Bath - 1446 x 1446 x 2035mm
Pyramid White Built-in Corner Bath - 1446 x 1446 x 2035mm
The Pyramid White Built-in Corner Bath is proudly manufactured in South Africa and offers a stunning white finish with a whipping tub shape. The piece is made from a single sheet of Perspex giving t greater strength and rigidity. The bath is designed to not stain, rust, or corrode due to the high gloss finish. This stunning bath offers a 5-year warranty against manufacturing defects.
Perfect for:
The Pyramid White Built-in Corner Bath is perfect for your modern bathroom as the smooth glossy feel rounded off edges give this bath a modern exclusive look.
Features:
Product Specifications
| Brand | Aquarius |
|---|---|
| Colour | White |
| Type | Built-In Bath |
| Depth | 420 mm |
| Height (mm) | 440 mm |
| Length (mm) | 2035 mm |
| Width (mm) | 1446 mm |
| Volume | 190 L |
| Waste Size | 51 mm |
| Overflow Size | 41 mm |
| Product Weight | 25.2 kg |
1. Unpack Your New Bath
- Decide how high you want the bath above your floor.
- Measure and make markings on the wall with a pencil.
- It is recommended that it should be at least 450mm above the floor.
- Once you have marked the height, securely fasten support battens (a long flat strip of squared timber or metal used to hold something in place or as a fastening against a wall) against the back and sidewall.
- Make sure the battens are leveled horizontally.
2. Position Bath
- Position your new bath with the backside resting on the battens.
- Check that the bath is perfectly level again by using your spirit level.
- Make sure area under the bath is clear of dirt and tools.
- Take care not to damage bath exterior during positioning.
3. Add Bricks and Cement Underneath
- Place three equally spaced rows of bricks, with ample cement, under the reinforcing ribs of the bath.
- This will support the underside and full weight of the bath.
- Check that the first row of bricks is as close as possible to the waste fitting.
- Check that the openings and sides are now level with the ends of the battens placed.
- Install your taps, waste pipe and plumbing fittings, if you have not already done so.
4. Complete The Frame
- The outside of the frame is often tiled with tiles or mosaic to create a cohesive bathroom design.
- Make sure to leave an access area or door if you are installing a whirlpool tub (for future repairs and maintenance).
- You can finish the frame with any materials that work with your requirement.
- Allow 24 hours for the sand and adhesive to set and dry completely.
- Open the taps and fill the bath with water slowly while constantly checking the waste outlet and water inlets for any leaks.
Note: The above is just a quick guide. If you are unsure about the installation than you can seek help from a qualified plumber or contractor.
Ready when you are!
Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.
Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.