Tivoli Caserta Chrome Basin Mixer Wall Type
Tivoli Caserta Chrome Basin Mixer Wall Type
If you are looking for a highly contemporary tap to add the finishing touches to your bathroom, this stunning mixer from our Tivoli Caserta collection could be just what you're after. Specially designed to be installed on the wall, this tap has been manufactured in chrome plated brass for both durability and a sparkling finish. It can be used with other taps from our Tivoli range to create a flowing style throughout your home.
Our Tivoli Taps are beautifully designed and manufactured in Italy, where they are manufactured by robotic machinery to the highest European standards.
Features:
- Bold, square and uncompromisingly modern design.
- Single Lever.
- Wall Type Installation.
- Colour/Finish: Chrome Polished.
- Ceramic disc control for smooth action and no drips.
- Simple lever operation for flow and temperature.
- Water Inlet: Two (for hot and cold water).
- Aerator creates a nice bubbly flow of water.
- Flow rate 6 litre/min at 3 bar pressure.
- The tap box does not include a popup waste or any flexi connectors.
Product Specifications
| Brand | Tivoli |
|---|---|
| Type | Basin Mixers |
| Colour | Chrome |
| Height (mm) | 145 mm |
| Length (mm) | 200 mm |
| Width (mm) | 220 mm |
Step 1. Turn Off Your Water and Remove Your Old Tap
- Before you remove the old tap, you need to first turn off the water supply for both hot and cold water from the mains supply.
- Then, run the hot and cold taps in your house for a few minutes to drain any excess water and ensure the mains is definitely switched off.
- Make sure all your taps remain open to prevent an air lock. If you have angle valves already installed than you can simply switch these off and do not need to turn off the main water supply.
- Unscrew the nut that locks the wall outlet to your old tap using a wrench.
Step 2. Unbox Your New Tap and Install
- Once the old tap is removed you can unbox your new tap and remove all the accessories from the box.
- Make sure you connect the s-connectors firmly to your tap first, this makes it much easier to install. The s-connection is used to install the wall type sinker mixer when your wall water outlets are wider that the distance of the two inlets.
- There are rubber washers included with the tap to make sure there is a water tight seal with the s-connection. Screw the nut tightly onto the threads with the s-connection. We recommend you use plumbing tape as well (not included) on the threads for a more water tight seal.
- We are now ready to mount the tap on to the wall water outlets. Adjust the s-connections to line them up with the wall water outlets and make sure it fits. Your tap should grip on to your wall outlets tightly and should not shake or wobble.
Step 3. Checks and Precautions
- Close all connections tightly and turn the water back on. Please connect the bottle trap to the popup waste if applicable before testing.
- Turn the tap on and make sure the water is mixing equally and water running smoothly in a nice bubbly flow.
- Check all connections with the water running for any leaks or drips.
Step 4. Installation Complete
- Once the water is running and no leaks are found the installation is complete.
- Make sure you use soapy water and a soft clean cloth for regular cleaning of your tap. We do not recommend to use any strong chemicals to clean your new beautiful tap.
- Now you can enjoy your brand new wall type mixer.
Ready when you are!
Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.
Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.