Tivoli Do Re Mi Chrome Shower Mixer
Tivoli Do Re Mi Chrome Shower Mixer
Do Re Mi has got simple and original lines. It's design, created from the pencil of the famous Architect Massimiliano Settimelli, draws inspiration of this tap from the lines of a score, from a simple and unambiguous musical note.
The Do Re Mi Luxury Chrome mixer, crafted with the finest ingredients, conceived with a unique vision, combines sensational design and supreme refinement in one compelling form. The Do Re Mi contemporary Italian range of mixers will make a sophisticated statement in your home with its designer-inspired smooth shiny polished chrome. Features a single lever handle on the side that gives finger tip control of the temperature and flow of water.
Features
- Simple modern design
- Single lever operation for flow and temperature control
- Three way shwoer mixer
- Colour/Finish: Polished Chrome
- Material: Durable Brass
- Ceramic disc control for smooth action and no drips
- Water Inlet: Two (hot and cold water) In and One (mixed) Out
- Includes plastic covers to protect tap during installation and tilling.
- Industry Leading State of The Art PVD Coating - no fading or body discoloration
- Easy to install and maintain
- Built to last a lifetime
- Intended for bathroom shower areas
Product Specifications
| Brand | Tivoli |
|---|---|
| Type | Shower Mixers |
| Colour | Chrome |
| Height (mm) | 125 mm |
| Length (mm) | 85 mm |
| Width (mm) | 85 mm |
| Guarantee/Warranty | 10 Year |
Step 1. Turn Off Your Water and Remove Your Old Tap
- Before you remove the old tap, you need to first turn off the water supply for both the hot and cold water from the mains supply.
- Then, run the hot and cold taps in your house for a few minutes to drain any excess water and ensure the mains is definitely switched off.
- Make sure all your taps remain open to prevent an air lock.
- If you are doing a new installation then you can jump to step 2.
Step 2. Connect To Water Outlets
- Once the old tap is removed you can unbox your new tap and remove all the accessories from the box.
- You can now connect the male end of the water outlets to the mixer inlets as shown. Keep in mind which connects to the hot and cold water.
- We recommend you use plumbing tape for a tight water proof connection.
- Make sure to keep the protective plastic covers provided on the mixer.
Step 3. Replaster the Wall
- Finish replastering the wall and fill in the gaps between the pipes as seen in the photo.
- You can now start the wall tile installation and finish grouting the tiles as well at this stage.
- Make sure to keep the protective cover on the mixer. This will prevent any scratches and damaged to the chrome finish when tiling.
Step 4. Connect Base Plate and Lever
- Now once the tiles are set and grout dried you can remove the protective covers and connect the base plate and lever.
- We recommend you use regular silicone to hold the base plate in place.
- Secure the lever and divertor button tightly and turn the water back on.
- Turn the tap on and make sure the water is mixing equally and water running smoothly.
- If you are installating a divertor mixer than Push and Pull the diverter button to check if the water is turning direction from the shower to the spout.
Step 5. Installation Complete
- Once the water is running and no leaks are found the installation is complete.
- Make sure you use soapy water and a soft clean cloth for regular cleaning of your tap. We do not recommend to use any strong chemicals to clean your tap.
- Now you can enjoy your brand new shower/diverter mixer tap.
Ready when you are!
Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.
Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.