Tivoli Kevon Black Eco Stop Basin Mixer
Tivoli Kevon Black Eco Stop Basin Mixer
This Kevon Black Eco Stop Basin mixer reduces your daily water consumption at the wash basin by up to 50%. If you multiply this by the number of taps in your home, it can add up to a huge saving for both your wallet and be good for the environment.
By adding air via the aerator and by having two lever operations, water consumption on this eco stop tap is reduced to around 3 litres per minute. The aerator is built into the spout of the basin tap and enriches the water with air, resulting in a full, bubbly champayne flow of water.
This beautifully crafted modern designed basin mixer is made in Italy by FIORE Rubinetterie. It is very popularly used on white bathrooms or dining area wash basins.
The tap includes a manual 32mm 1"1/4 slotted pop-up waste with rod and two flexi connectors to connect the tap with the cold and hot water supply.
Features:
- Surface finish Smooth Black Matt.
- Cast solid brass body.
- Height of mixer 156mm.
- Height up to aerator 101mm.
- 32° angle aerator for comfortable use of water.
- Cartridge diameter 35mm with 2 ceramic disks.
- Flow rate 7 litre/min at 3 bar (lever at postion B).
- Flow rate 3.5 litre/min at 3 bar (lever at postion A).
- Includes two flexi connecters and a matching matt black finish popup waste.
Product Specifications
| Brand | Tivoli |
|---|---|
| Type | Basin Mixers |
| Colour | Black |
| Length (mm) | 153 mm |
| Width (mm) | 52 mm |
10 Year Guarantee
Exclusive To CTM
Water Saving Feature
Easy To Install & Maintain
Eco Stop Cold Start Cartridge
Made In Italy
Step 1. Turn Off Your Water and Remove Your Old Tap
- Before you remove the old tap, you need to first turn off the water supply for both hot and cold water from the mains supply.
- Then, run the hot and cold taps in your house for a few minutes to drain any excess water and ensure the mains is definitely switched off.
- Make sure all your taps remain open to prevent an air lock. If you have angle valves connected than you can simply switch these off and do not need to turn off the mains.
- Get under your basin and unscrew the nut that locks the basin to your old tap.
Step 2. Unbox Your New Tap
- Once the old tap is removed you can unbox your new tap and remove all the accessories from the box.
- Make sure you connect the flexi connectors firmly to your tap first, then feed into the basin hole, so your tap sits on top of your basin. This makes it much easier to install, with the flexi connectors poking out below.
- There may be a rubber washer included with the tap to make sure the tap sits firmly. Screw the nut tightly onto the threads at the bottom. Make sure your tap is now gripped on to your basin and does not shake.
Step 3. Connect To Water Outlets
- You can now connect the other end of the flexi connectors to the wall water outlets. Keep in mind which connects to the hot and cold water.
- If your tap comes with a pop-up waste then you will need to assemble the popup and rod to the tap first and adjust the length to fit your basin.
Step 4. Checks and Precautions
- We recommend you use a plumbing tape for all the threaded connections
- Make sure all the flexi connectors are not tangled or bent.
- Close all connectors tightly and turn the water back on. Please connect the bottle trap to the popup waste if applicable.
- Check all connections and the pop-up waste for any leaks. You can also push the rod up and down to test and make sure the popup opens and closes.
- Turn the tap on and make sure the water is mixing equally and water running smoothly.
Step 5. Installation Complete
- Once the water is running and no leaks are found the installation is complete.
- Make sure you use soapy water and a soft clean cloth for regular cleaning of your tap. We do not recommend to use any strong chemicals to clean your new beautiful tap.
- Now you can enjoy your brand new tap.
Ready when you are!
Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.
Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.