Tivoli Mistral Chrome Basin Mixer
Tivoli Mistral Chrome Basin Mixer
Create a modern look in your bathroom with this Mistral Basin Mixer Tap. This single lever modern design is made for a single tap hole installation on a ceramic basin or vanity unit.
Boasting both solid brass material and a gorgeous polished chrome finish, this tap is guaranteed to improve the appearance of your bathroom or cloakroom. This basin mixer also comes complete with a basin waste, not only saving you further hassle, but also assuring you that it will compliment the style of the tap.
Features
- Modern design with lever operation.
- Fixed spout.
- Chrome Shiny Finish.
- Material: Solid Brass.
- Includes two flexi connectors.
- Includes one chrome pop-up waste with rod.
- Made In Italy.
- Tap head contains an aerator* for a bubbly champagne flow of water.
- Easy to install and maintain.
- Brand Name: Tivoli.
- Suitable for high and low pressure.
- Flow rate 6 litre/min at 3 bar pressure.
* A tap aerator is designed to reduce the required flow of water, which will in turn reduce your water usage in the long run. Tap aerators have many tiny holes in them as seen in the photo above. This separates the water into different streams which allows air to mix with the water flow, creating a nice bubbly champagne flow of water and reducing the amount of water you need to use.
Product Specifications
| Brand | Tivoli |
|---|---|
| Type | Basin Mixers |
| Colour | Chrome |
| Height (mm) | 124 mm |
| Length (mm) | 149 mm |
| Width (mm) | 51.5 mm |
| Guarantee/Warranty | 10 Year |
10 Year Guarantee
Exclusive To CTM
Water Saving Feature
Easy To Install & Maintain
Modern Style & Design
Made In Italy
Step 1. Turn Off Your Water and Remove Your Old Tap
- Before you remove the old tap, you need to first turn off the water supply for both hot and cold water from the mains supply.
- Then, run the hot and cold taps in your house for a few minutes to drain any excess water and ensure the mains is definitely switched off.
- Make sure all your taps remain open to prevent an air lock. If you have angle valves connected than you can simply switch these off and do not need to turn off the mains.
- Get under your basin and unscrew the nut that locks the basin to your old tap.
Step 2. Unbox Your New Tap
- Once the old tap is removed you can unbox your new tap and remove all the accessories from the box.
- Make sure you connect the flexi connectors firmly to your tap first, then feed into the basin hole, so your tap sits on top of your basin. This makes it much easier to install, with the flexi connectors poking out below.
- There may be a rubber washer included with the tap to make sure the tap sits firmly. Screw the nut tightly onto the threads at the bottom. Make sure your tap is now gripped on to your basin and does not shake.
Step 3. Connect To Water Outlets
- You can now connect the other end of the flexi connectors to the wall water outlets. Keep in mind which connects to the hot and cold water.
- If your tap comes with a pop-up waste then you will need to assemble the popup and rod to the tap first and adjust the length to fit your basin.
Step 4. Checks and Precautions
- We recommend you use a plumbing tape for all the threaded connections
- Make sure all the flexi connectors are not tangled or bent.
- Close all connectors tightly and turn the water back on. Please connect the bottle trap to the popup waste if applicable.
- Check all connections and the pop-up waste for any leaks. You can also push the rod up and down to test and make sure the popup opens and closes.
- Turn the tap on and make sure the water is mixing equally and water running smoothly.
Step 5. Installation Complete
- Once the water is running and no leaks are found the installation is complete.
- Make sure you use soapy water and a soft clean cloth for regular cleaning of your tap. We do not recommend to use any strong chemicals to clean your new beautiful tap.
- Now you can enjoy your brand new tap.
Ready when you are!
Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.
Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.