Tivoli Porta Romana Chrome Bath/Shower Mixer Tap
Tivoli Porta Romana Chrome Bath/Shower Mixer Tap
If you are looking for a highly contemporary tap to add the finishing touches to your bathroom, this stunning mixer from our Tivoli Porta Romana collection could be just what you're after. Specially designed for use in shower areas or bathtubs, this tap has been manufactured in chrome plated brass for both durability and a sparkling finish. It can be used with other taps from our Tivoli range to create a flowing style throughout your home.
Our Tivoli Taps are beautifully designed and manufactured in Italy, where they are manufactured by robotic machinery to the highest European standards.
The tap includes a manual 32mm 1"1/4 slotted pop-up waste with rod and two flexi connectors to connect the tap with the cold and hot water supply.
Features:
- Bold, round and uncompromisingly modern design
- Single Lever
- Pillar Type
- Colour/Finish: Chrome Polished
- Ceramic disc control for smooth action and no drips
- Simple lever operation for flow and temperature
- Water Inlet: Two (hot and cold water)
- Water Outlet: One (mixed)
Product Specifications
| Brand | Tivoli |
|---|---|
| Type | Shower Mixers |
| Colour | Chrome |
| Height (mm) | 100 mm |
| Length (mm) | 99 mm |
| Width (mm) | 100 mm |
Step 1. Turn Off Your Water and Remove Your Old Tap
- Before you remove the old tap, you need to first turn off the water supply for both the hot and cold water from the mains supply.
- Then, run the hot and cold taps in your house for a few minutes to drain any excess water and ensure the mains is definitely switched off.
- Make sure all your taps remain open to prevent an air lock.
- If you are doing a new installation then you can jump to step 2.
Step 2. Connect To Water Outlets
- Once the old tap is removed you can unbox your new tap and remove all the accessories from the box.
- You can now connect the male end of the water outlets to the mixer inlets as shown. Keep in mind which connects to the hot and cold water.
- We recommend you use plumbing tape for a tight water proof connection.
- Make sure to keep the protective plastic covers provided on the mixer.
Step 3. Replaster the Wall
- Finish replastering the wall and fill in the gaps between the pipes as seen in the photo.
- You can now start the wall tile installation and finish grouting the tiles as well at this stage.
- Make sure to keep the protective cover on the mixer. This will prevent any scratches and damaged to the chrome finish when tiling.
Step 4. Connect Base Plate and Lever
- Now once the tiles are set and grout dried you can remove the protective covers and connect the base plate and lever.
- We recommend you use regular silicone to hold the base plate in place.
- Secure the lever and divertor button tightly and turn the water back on.
- Turn the tap on and make sure the water is mixing equally and water running smoothly.
- If you are installating a divertor mixer than Push and Pull the diverter button to check if the water is turning direction from the shower to the spout.
Step 5. Installation Complete
- Once the water is running and no leaks are found the installation is complete.
- Make sure you use soapy water and a soft clean cloth for regular cleaning of your tap. We do not recommend to use any strong chemicals to clean your tap.
- Now you can enjoy your brand new shower/diverter mixer tap.
Ready when you are!
Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.
Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.