Toscana Black Wall Hung Cabinet and Mirror Cabinet - 800 x 455 x 460mm
Toscana Black Wall Hung Cabinet and Mirror Cabinet - 800 x 455 x 460mm
Provide a beautiful finishing touch to your bathroom with the stunning Toscana Black 800mm bathroom cabinet. This two drawer wall hung, satin finish, ebony vanity unit come with a smooth white glossy basin top. A Victorian inspired design with a modern twist, a great alternative to the basin and pedestal if your bathroom has the space to accommodate it.
The two cabinets as seen in the photo can be installed in an offset configuration or over & under configuration. The bottom basin and top mirror cabinet features soft-closing drawers & doors to eliminate slams and provide generous storage space for your toiletries, helping to keep your bathroom tidy and safe.
This soft close drawers that can hold a weight of up to 25 kg each. The drawers can be set after the installation of the cabinet in order to be 100% level.
The top drawer has smaller compartments that can be used for smaller items that require some order and grouping in your bathroom. The drawer design allows for the bottle trap to be installed in the middle below the basin.
In addition to the two drawers, there is a top mirror cabinet for additional storage.
Product Details
- Vanity Width: 800 mm.
- Vanity Height: 620 mm.
- Vanity Depth: 460 mm.
- Mirror Cabinet: 800(w) x 140(d) x 800(h) mm.
- Basin: 450(w) x 270(l) x 120(d) mm
- Colour: Black.
- Material: MDF / Ceramic.
- Style: Modern Satin Finish.
- Type: Wall Hung Bathroom Vanity Unit
- The Basin cabinets are made up of two soft-closing drawers which slide open.
- The Mirror cabinet consists of two soft-closing doors which swing open.
- All instructions to assemble included.
- Fixation screws are included.
- Soft-closing hinges prevent slamming.
- Supplied with high-grade gloss white ceramic basin with overflow and one tap hole.
- Basin taps not included.
Product Specifications
| Brand | STN |
|---|---|
| Type | Cabinet & Basin Set |
| Colour | Black |
| Doors | 2 |
| Drawers | 2 |
| Shelves | 0 |
| Height (mm) | 316 mm |
| Length (mm) | 460 mm |
| Width (mm) | 800 mm |
| Packaging | Preassembled |
Tools you’ll need:
- Rubber hammer.
- Electric drill.
- Pencil.
- Sealant gun.
- Spirit level.
- Standard screwdrivers.
- Tape measure.
Check you have the following:
- Ceramic Basin
- Basin Cabinet
- Mirror Cabinet
- Screws and Plugs
- Clips and hooks
- Silicone sealant
Step 1. Turn Off Your Water and Remove Your Old Bathroom Cabinet.
- Before you remove the old vanity, you need to first turn off the water supply to the tap on the angle valve and disconnect the bottle trap waste.
- Tip: Cut newspapers to match the size of the cabinet. Place the newspaper on the wall with masking tape to determine the best placement for your basin cabinet and the wall mounted mirror.
- Use a pencil and a spirit level to draw a line marking on the newspaper where the bottom edge of the cabinet should be placed on the wall.
Step 2. Unbox Your New Bathroom Vanity.
- Once the old vanity is removed you can unbox your new bathroom vanity and remove all the accessories from the box.
- Check the brackets and mark the position of the holes you will need to drill on the newspaper. Do this for the bottom cabinet first and then the top mirror cabinet.
- Tip: You can draw the outline of the cabinet in the newspaper to show you where the cabinet will be mounted. This will allow you to adjust the height of the basin cabinet and avoid drilling multiple holes.
Step 3. Drill Your Mounting Holes.
- Drill the holes in the wall which you will screw in the mounting brackets.
- Once the holes have been drilled you can insert the plugs and screw in the brackets.
- If your basin and mirror cabinet comes flat packed than you will first need to assemble it as per the instruction manual.
- Mount the basin cabinet onto the brackets you have just fixed on the wall. Remove your newspaper and masking tape.
- Once the basin cabinet is secure you can fix the mirror cabinet and hang it onto the wall.
Step 4. Mount Ceramic Basin, Tap and Waste Connection.
- Place the ceramic basin on top of the cabinet. Install the tap onto the ceramic basin hole and connect the flexi connectors to the angle valves.
- Connect the popup waste and the rod to the tap. The bottle trap will connect to this popup waste. Make sure the rod to activate the popup are also connected to the tap.
- Once this is done you can place the ceramic basin on top of the basin cabinet.
- Check all the connections and make sure everything is securely fastened.
Step 5. Installation Complete.
- Turn the water back on and if no leaks are found the installation is now complete.
- Make sure you use soapy water and a soft clean cloth for regular cleaning of your cabinet. We do not recommend to use any strong chemicals to clean your new beautiful bathroom vanity.
- Now you can enjoy your brand new bathroom cabinet.
Ready when you are!
Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.
Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.